PULLEY WINDING MACHINE
FEATURES | |
---|---|
Production Interval: | From DN6 to DN25 |
Electricity Value: | 220 Volt |
Frequency: | 50 Hz |
Power: | 2.0 kW |
Motor: | AC Motor |
OPTIONS |
---|
Manual / automatic option |
Start / stop option |
Piston open/ closed option |
Direction forward/ backward |
Manual forward/ backward |
Meter reset option |
Automation: | PLC Control |
Speed control: | Adjustable Speed Control |
Length Value: | Real Value |
STAINLESS STEEL FLEXIBLE HOSE MACHINE TYPE-25
FEATURES | |
---|---|
Production Capasity: | Up to 2.5 m/minute |
Production Interval: | From DN6 to DN25 |
Steel Sheet Capacity: | 1.2 ton |
Pneumatic Pressure: | 6 bar |
Control Unit: | 7″ Color Display Panel |
MACHINE UNITS |
---|
Uncoiler Unit |
Welding Unit |
Welder Unit |
Caterpillar Unit |
Forming Unit |
Washing Unit |
Winding Unit |
Hose Forming Stations: |
Station-1:First hose forming station( pitchs are biggest) |
Station-2:Second hose forming station(the pitchs are more smaller than first station) |
Station-3:Third hose forming station( pitchs are more smaller than second station) |
Calibration Station: The pitched hose turning to calibratied hose in this station |
AUTOMATION PANEL MAIN MENU |
---|
MAIN MENU |
7″ Colorful touchscreen |
Available language options |
Being able to see the produced hose length on the screen |
Can be reset at any time (can be reset hose length on the screen) |
There is an alarm light |
MACHINE SETTINGS |
Different speed setting for each unit |
Table showing instant machine status |
Calibration table for: uncoiler, forming, winding units(these units have calibration features) |
There is an alarm page ( shows all alarm conditions) |
Automation: | PLC Control |
Electrical Power: | 20 kw |
Weight: | 3215 kg |
More Features
Fully Covered or semi covered(can be customized) |
From DN32 to DN50(it can be special sizes) |
TIG Welding(micoplazm and laser welding optional) |
Forming Units Design Stable and Compact |
PVC Welding Channel(Rollform System is optional) |
Up to 2 m/min production speed |
Possible to make hoses according to USA and Europe standarts |
AC Motor with driver Servo motor is optional |
VERTICAL WELDING MACHINE TYPE-50
FEATURES | |
---|---|
Production Interval: | From DN6 to DN50 |
Electric Value: | 3 PH – 380 Volts |
Frequency: | 50Hz – 16 Amps |
Engine: | 0.85 kW Servo Motor (AC Motor optional) |
Feeding Type: | Wire Feed (with Stepper Motor) |
AUTOMATION FEATURES: |
---|
Adjustable speed-ramp values |
Adjustable rotation angle |
Adjustable wire feed angle |
Adjustable welding angle |
Adjustable reference point |
Manual rotation |
Speed values depending on the angle |
Start and stop by angle |
Automation: | Fatek PLC |
Welding: | Tig Welding |
MORE FEATURES:
Clean welding internally |
Externally shielding gas |
Stainless wire feeding |
TIG welding inventor (optional) |
Precision adjustable torch holder system |
Interchangeable diameter copper jaws |
Centering top press |
Protective welding glass |
Rotation speeds and angles from the screen adjustable |
Gas times and start-end points are adjustable |
7″ touch screen |