PULLEY WINDING MACHINE
| FEATURES | |
|---|---|
| Production Interval: | From DN6 to DN25 |
| Electricity Value: | 220 Volt |
| Frequency: | 50 Hz |
| Power: | 2.0 kW |
| Motor: | AC Motor |
| OPTIONS |
|---|
| Manual / automatic option |
| Start / stop option |
| Piston open/ closed option |
| Direction forward/ backward |
| Manual forward/ backward |
| Meter reset option |
| Automation: | PLC Control |
| Speed control: | Adjustable Speed Control |
| Length Value: | Real Value |
STAINLESS STEEL FLEXIBLE HOSE MACHINE TYPE-25
| FEATURES | |
|---|---|
| Production Capasity: | Up to 2.5 m/minute |
| Production Interval: | From DN6 to DN25 |
| Steel Sheet Capacity: | 1.2 ton |
| Pneumatic Pressure: | 6 bar |
| Control Unit: | 7″ Color Display Panel |
| MACHINE UNITS |
|---|
| Uncoiler Unit |
| Welding Unit |
| Welder Unit |
| Caterpillar Unit |
| Forming Unit |
| Washing Unit |
| Winding Unit |
| Hose Forming Stations: |
| Station-1:First hose forming station( pitchs are biggest) |
| Station-2:Second hose forming station(the pitchs are more smaller than first station) |
| Station-3:Third hose forming station( pitchs are more smaller than second station) |
| Calibration Station: The pitched hose turning to calibratied hose in this station |
| AUTOMATION PANEL MAIN MENU |
|---|
| MAIN MENU |
| 7″ Colorful touchscreen |
| Available language options |
| Being able to see the produced hose length on the screen |
| Can be reset at any time (can be reset hose length on the screen) |
| There is an alarm light |
| MACHINE SETTINGS |
| Different speed setting for each unit |
| Table showing instant machine status |
| Calibration table for: uncoiler, forming, winding units(these units have calibration features) |
| There is an alarm page ( shows all alarm conditions) |
| Automation: | PLC Control |
| Electrical Power: | 20 kw |
| Weight: | 3215 kg |
More Features
| Fully Covered or semi covered(can be customized) |
| From DN32 to DN50(it can be special sizes) |
| TIG Welding(micoplazm and laser welding optional) |
| Forming Units Design Stable and Compact |
| PVC Welding Channel(Rollform System is optional) |
| Up to 2 m/min production speed |
| Possible to make hoses according to USA and Europe standarts |
| AC Motor with driver Servo motor is optional |
VERTICAL WELDING MACHINE TYPE-50
| FEATURES | |
|---|---|
| Production Interval: | From DN6 to DN50 |
| Electric Value: | 3 PH – 380 Volts |
| Frequency: | 50Hz – 16 Amps |
| Engine: | 0.85 kW Servo Motor (AC Motor optional) |
| Feeding Type: | Wire Feed (with Stepper Motor) |
| AUTOMATION FEATURES: |
|---|
| Adjustable speed-ramp values |
| Adjustable rotation angle |
| Adjustable wire feed angle |
| Adjustable welding angle |
| Adjustable reference point |
| Manual rotation |
| Speed values depending on the angle |
| Start and stop by angle |
| Automation: | Fatek PLC |
| Welding: | Tig Welding |
MORE FEATURES:
| Clean welding internally |
| Externally shielding gas |
| Stainless wire feeding |
| TIG welding inventor (optional) |
| Precision adjustable torch holder system |
| Interchangeable diameter copper jaws |
| Centering top press |
| Protective welding glass |
| Rotation speeds and angles from the screen adjustable |
| Gas times and start-end points are adjustable |
| 7″ touch screen |